Calibrating and adjusting temperature measurement - MGP261 - MGP262

MGP260 User Guide

Document code
Document type
User guide
Figure 1. Temperature adjustment view in Insight

Prepare a temperature calibrator or similar to create a suitable reference condition.

You can adjust temperature either in nitrogen or in air.
  1. Insert your device in the reference environment.
  2. Wait for the measurement (shown in the graph) to stabilize fully.
  3. When the measurement has stabilized, click the Reference value, point 1 text box and enter the known temperature of the calibration point. Press ENTER or click outside the text box when done.
  4. Check that the measured value for point 1 is automatically inserted.
  5. Check the difference between the reference and the measured value. Very large differences may be due to insufficient stabilization time or unsuitable calibration setup.
    1. If you want to apply the adjustment you have made, select Activate adjustment.
    2. To exit without taking the adjustment in use, select Close.
  6. After completing the adjustment, update the information in the Calibration information tab.