Installation option: ball valve installation - MGP262 - MGP261

MGP260 User Guide

Document code
M212504EN
Revision
B
Language
English (United States)
Product
MGP262
MGP261
Document type
User guide
Figure 1. MGP260 installation example with wiring routes and recommended orientation and depth.
Figure 1 shows an example MGP260 ball valve installation. The figure highlights the correct wiring routes and shows the recommended installation depth and orientation.

An external pressure measurement instrument (item 5) is shown as an example of pressure compensation input options: for a description of alternative options, see Pressure compensation input options.

1
External pressure or temperature sensor input wiring (Ex ia): use the M16x1.5 lead-through and route the cable directly to the terminal.
2
Standard analog output, power supply input, and RS-485 communication wiring: use the M20x1.5 lead-throughs and route the cables to the terminals through the openings below the component board.
3
Metal barrier separating the intrinsically safe external sensor input terminals (optional, for environmental compensation input) from the analog output, power supply input, and RS-485 terminals on the component board.
4
1.5" male NPT thread on MGP260: never install to any other thread type than 1.5" female NPT.
5
Example pressure compensation input option: an external measurement instrument connected to the MGP260 Ex ia input terminals (item 1).
6
For best results, install MGP260 horizontally and position the tip of the filter within 1/3 of the pipe's diameter from the pipe centerline. In smaller pipes, the installation depth can be adjusted by using an adapter (for example, a ball valve).
CAUTION Always use a separate cable for the external pressure or temperature sensor input (Ex ia) wiring (1), and make sure the wiring remains separated from the terminals and wiring (2) on the other side of the metal barrier (3) on the component board.