To take a new sensor into use after the initial configuration, install the sensor and enable it in the Web UI. The sensor parameters to be enabled are located in the features parameter group.
If a sensor is malfunctioning, you can disable it in the configuration to stop the related error messages.
| Parameter name | Sensor |
|---|---|
| BARO_1 | Pressure Sensor BARO‑1 |
| CEILO_1 | Ceilometer CL31 |
| HMP_D_1 | Humidity and Temperature Probe HMP155 (analog) |
| HMP_S_1 | Humidity and Temperature Probe HMP155 (serial) |
| NMEA_WIND_1 | WINDCAP Ultrasonic Wind Sensor WMT700 |
| NMEA_WIND_2 | Secondary WINDCAP Ultrasonic Wind Sensor WMT700 (if using 2 wind sensors) |
| NR_D_1 | Net Solar Radiation Sensor NR Lite2 |
| PLUVIO_1 | Precipitation Gauge OTT Pluvio2 L |
| PTB_1 | BAROCAP Digital Barometer PTB330 |
| PWD_1 | Present Weather Detector PWD22 |
| SDUR_D_1 | Sun Duration Sensor CSD3 |
| SR_D_1 | Pyranometer SP Lite2 |
| SR_S_1 | Pyranometer SMP3/SMP6 (Modbus) |
| SR_S_2 | EKO MS Series Pyranometer (interface only) |
| TIPPING_BUCKET_1 | Rain Gauge SBS314 |
| TS_D_1 | Soil Temperature Sensor QMT110 |
| UV_D_1 | UV Radiometer SUV5 |
| WXT_1 | WXT530 Series Weather Transmitter |
-
To enable a sensor, set the Active value of the parameter to on.