|
-
Turn the lock levers to the middle position one by one. You can use your fingers or a
flat head screwdriver.
Using a screwdriver may be helpful especially in tight spaces. CAUTION Do not pull from the wires or try to remove the connector without first turning the lock levers to the middle position.
Do not turn the lock levers by force.
- 1
- Slot for screwdriver
- 2
- Lock lever locked
- 3
- Lock lever in the middle position
-
Remove the connector with your fingers.
If you need to remove a wire from the connector, push the release button next to the wire with a flat head screwdriver and pull the wire out of the connector. The easiest way to remove a wire from the connector is to do it while the connector is attached to the plug‑in module in DMU801.