Replacing enclosure heating control relay - AWS810

AWS810 Configuration and Maintenance Guide
Document code
M212419EN
Revision
H
ft:locale
en-US
Product
AWS810
Document type
User guide
  • Flat head screwdriver
  1. Switch off AC (mains) or external DC power, depending on the powering. Make sure that there is no power available to the station.
  2. Disconnect cabling from the heating control relay.
  3. Release the DIN rail locking piece and remove the relay from the DIN rail.
  4. Insert the new relay on the DIN rail and snap it to place.
  5. Connect the cabling to the new relay.
  6. Switch on power.