Configuring EKO MS series sensor - AWS810

AWS810 Configuration and Maintenance Guide
Document code
M212419EN
Revision
H
ft:locale
en-US
Product
AWS810
Document type
User guide

EKO MS series pyranometer is connected to the DMU801 data management unit through port D4.

The factory default Modbus address of the EKO MS sensor equals the last 2 digits of the sensor serial number. Set the Modbus address in the station parameters.

  1. In the Web UI, go to Settings > Station parameters.
  2. Locate the sr_s_2 parameter group on the parameter list.
  3. In parameter address, change the value to be the last 2 digits of the EKO MS sensor serial number.
  4. (Optional) In parameters instrument_manufacturer and instrument_model, type the model and manufacturer name of the sensor.
  5. (Optional) In parameter allow_hotplug, change the value if needed. Allowing hotplug means that you can replace the sensor and the weather station detects it even without a restart. The feature is enabled by default.
  6. To save the changes and take them into use, select Save and restart script.