Installing VEGAPULS 61 - AWS810

AWS810 Installation Guide

Document code
M212418EN
Revision
G
Language
English
Product
AWS810
Document type
User guide
4-mm and 5-mm Allen keys

You can install VEGAPULS 61 on a wall or a support arm. The mounting strap allows a 90° angle of inclination.

Figure 1. VEGAPULS 61 installation accessories
1
Fender washer A6.4 DIN9021 A4 (2 pcs)
2
Spring washer B6 DIN127 A4 (2 pcs)
3
Hex screw M6×16 DIN912 (2 pcs)
4
Hex screw M5×10 DIN912 (3 pcs)
5
Spring washer B5 DIN127 A4 (3 pcs)
To prevent corrosion, oxidation, and seizing, use a non‑conductive, non‑water‑soluble, non‑silicone‑based grease, such as ceramic or Teflon paste, between different kinds of metal.
  1. Attach the mounting strap to the sensor. Do not tighten all the way.
  2. Adjust the sensor inclination.
  3. Tighten the screws.
  4. Attach the sensor from the mounting strap to the installation place.
  5. Connect the sensor cable.