Termbox connections - AWS810

AWS810 Installation Guide

Document code
M212418EN
Revision
G
Language
English
Product
AWS810
Document type
User guide

The AC (mains) cable is led into Termbox through cable gland 1 (CG1). The connection points are the 5 leftmost in the terminal connector block: PE, N, L1, L2, and L3.

  • N and L1 are internally wired to the surge protectors.
  • Phases L2 and L3 are not pre-wired.
  • L2 and L3 connectors are connection points for unusable wires.
Figure 1. Front view of AC power connections
Table 1. Cable gland sizes
Cable Diameter Wrench size
CG1 Mains in 18 … 25 mm (0.71 … 0.98 in) 32 mm
CG2 Mains out 18 … 25 mm (0.71 … 0.98 in) 32 mm
CG3 Mains out for instrument 7 … 12 mm (0.28 … 0.47 in) 20 mm
CG4 Auxiliary power out 7 … 12 mm (0.28 … 0.47 in) 20 mm
CG5 Incoming cables 7 … 12 mm (0.28 … 0.47 in) 20 mm
CG6 Outgoing signal cables 5 … 10 mm (0.20 … 0.39 in) 20 mm
CG7 Incoming cables 7 … 12 mm (0.28 … 0.47 in) 20 mm
CG8 Outgoing signal cables 5 … 10 mm (0.20 … 0.39 in) 20 mm
Figure 2. Cable glands. The CG2 cable gland is covered with a blocking plug. The cable glands CG4 to CG8 are blocked by dummy plugs.