Mounting ENC652 without mounting frame on wall or back panel - AWS810

AWS810 Installation Guide

Document code
M212418EN
Revision
G
Language
English
Product
AWS810
Document type
User guide
  • Drill
  • 10‑mm wrench

Use this mounting, if you do not need the cabling box and the radiation shield. Otherwise you must install the enclosure on the wall or back panel using the mounting frame.

Before mounting the enclosure, remove the mounting studs from the mounting holes and attach the anchor plugs in their place.

Figure 1. Enclosure mounted on wall
  1. Drill holes into the wall.
  2. Place the anchor plugs into the drilled holes.
    1
    Hole for anchor plug 8×60 mm (4 pcs)
    2
    Anchor plug 8×40 mm (4 pcs)
    3
    Washer with EPDM gasket 6.8/16×1.5/A2/EPDM (4 pcs)
    4
    Wood screw 6×60 mm DIN571 (4 pcs)
  3. Fix the enclosure to the wall with screws.
1 Electronics not shown.