| CAUTION To prevent solar radiation heating the enclosure, install the enclosure with its door facing north in the Northern Hemisphere and south in the Southern Hemisphere. |
Before starting the installation:
- If there is packing foam inside the enclosure, remove it before mounting the enclosure.
- Check which holes at the bottom of the cabling box you need for cabling, and knock off the covers using a screwdriver or similar.
- 1
- Radiation shield
- 1.1
- Hex nut M6 DIN934 A4 (4 pcs)
- 1.2
- Spring washer B6 DIN127 A4 (4 pcs)
- 1.3
- Hex screw M6×16 ISO7380 A4 (4 pcs)
- 1.4
- Flat washer A6.4 DIN127 A4 (4 pcs)
- 2
- Mounting frame
- 3
- Cabling box
- 3.1
- Flat washer A6.4 DIN125 A4 (2 pcs)
- 3.2
- Hex screw M6×16 ISO7380 A4 (2 pcs)
- 3.3
- Cabling box cover
- 3.4
- Washer with EPDM gasket A6.8/16×1.5/A2/EPDM
- 3.5
- Wing screw M6×16 DIN316 A4
- 4
- Enclosure
- 4.1
- Washer with EPDM gasket A6.8/16×1.5/A2/EPDM (2 pcs)
- 4.2
- Hex screw M6×16 ISO7380 A4 (2 pcs)
- 4.3
- Washer with EPDM gasket A6.8/16×1.5/A2/EPDM (2 pcs)
- 4.4
- Hex lock nut M6 Wulock Fe/Zn (2 pcs)
- 4.5
- Hanger screw (2 pcs)
- 4.6
- Hex nut M8 DIN934 A4 (8 pcs)
- 5
- Backplate
- 5.1
- Hex lock nut M6 Wulock Fe/Zn (8 pcs)
