The s command can be used to stop continuous data sending or to request a single set of measurement data.
The command s is the same as s enddata 0.
Example
/> senddata 1000
/> Unit ID: 1, Client ID: 0, ID: 0x20, Nb: 6, Len: 54, icd_version: D, Err: 0
W: 0.00, I: 0.00, S: 0.00, G: 0.82, St: 1, EN: 1, TA: 24.08, RH: 47.40, DP: 11.51, FP: 11.51, TS: 23.66, C: 8743, DW: 0x0000, DE: 0x0000, USt: 0x00000000, UE: 0x00000000
Unit ID: 1, Client ID: 0, ID: 0x20, Nb: 7, Len: 54, icd_version: D, Err: 0
W: 0.00, I: 0.00, S: 0.00, G: 0.82, St: 1, EN: 1, TA: 24.08, RH: 47.40, DP: 11.51, FP: 11.51, TS: 23.66, C: 8783, DW: 0x0000, DE: 0x0000, USt: 0x00000000, UE: 0x00000000
Unit ID: 1, Client ID: 0, ID: 0x20, Nb: 8, Len: 54, icd_version: D, Err: 0
W: 0.00, I: 0.00, S: 0.00, G: 0.82, St: 1, EN: 1, TA: 24.08, RH: 47.40, DP: 11.51, FP: 11.51, TS: 23.66, C: 8822, DW: 0x0000, DE: 0x0000, USt: 0x00000000, UE: 0x00000000
s
/> Unit ID: 1, Client ID: 0, ID: 0x20, Nb: 7, Len: 54, icd_version: D, Err: 0
W: 0.00, I: 0.00, S: 0.00, G: 0.82, St: 1, EN: 1, TA: 24.08, RH: 47.40, DP: 11.51, FP: 11.51, TS: 23.66, C: 8843, DW: 0x0000, DE: 0x0000, USt: 0x00000000, UE: 0x00000000