Connecting probes to Indigo500 series transmitters - DMP5 - DMP6 - DMP7 - DMP8 - DMPX - INDIGO520

DMP Series User Guide

Document code
M212357EN
Revision
D
Language
English
Product
DMP5
DMP6
DMP7
DMP8
DMPX
Document type
User guide
CAUTION The IP classification of probes is valid only when the probes are connected to the probe connection cable.
If your transmitter was delivered with preconfigured analog outputs, make sure that you connect the measurement devices accordingly. See the label inside the transmitter enclosure for the correct order of the measurement devices.
Figure 1. Connecting probes to Indigo500 transmitter.

Probes are connected to Indigo500 series transmitters using a cable. Connections are made to the screw terminals inside the housing. The Indigo520 model allows 2 probes to be connected. After connecting a probe, use the touchscreen interface or the web user interface to configure the transmitter.

1
Probe connection cable for probe 1
2
Probe connection cable for probe 2
3
Probe to be connected as probe 2
4
Probe to be connected as probe 1
5
Probe cable connector (5-pin M12)