Connecting probe to Indigo200 series transmitters - DMP5 - DMP6 - DMP7 - DMP8 - DMPX - INDIGO201 - INDIGO202

DMP Series User Guide

Document code
M212357EN
Revision
D
Language
English
Product
DMP5
DMP6
DMP7
DMP8
DMPX
Document type
User guide

Indigo200 series transmitters have a probe connector where compatible probes can be attached directly. A cable may also be used to connect the probe. Cables are available to order at store.vaisala.com.

CAUTION The IP classification of probes is valid only when the probes are connected to the probe connection cable, or to the cable connector inside the locking wheel of the transmitter.
Figure 1. Connecting probe to Indigo200 series transmitter
  1. Insert the probe or the cable into the transmitter's connector. Using a cable is recommended for strain relief.
  2. Turn the locking wheel of the transmitter to lock the probe or cable in place. Do not turn the probe or the cable itself, as that will damage the connectors.
  3. If you are using a cable, connect the probe to the cable.
  4. When the transmitter recognizes the connected probe, it shows a notification message on the display.