Cooling Set installation example - DMP5 - DMP6 - DMP7 - DMP8 - DMPX

DMP Series User Guide

Document code
M212357EN
Revision
D
Language
English
Product
DMP5
DMP6
DMP7
DMP8
DMPX
Document type
User guide
Figure 1. Example installation with Cooling Set DMP246CS
1
Process chamber, maximum temperature +350 °C (+662 °F)
2
Mineral wool or other insulation, total wall thickness is < 125 mm (4.92 in) so no lengthening piece is welded to mounting tube
3
Space outside process chamber, in ambient temperature
4
Location of dew point sensor when probe head is installed in the cooling set (under sintered filter)
5
Tube of the mounting flange welded to inner plate of process wall
6
Cooling set attached to mounting flange using mounting screws (4 pcs)