Output parameters - DMP5 - DMP6 - DMP7 - DMP8 - DMPX

DMP Series Quick Guide

Document code
M212356EN
Revision
E
Language
English
Product
DMP5
DMP6
DMP7
DMP8
DMPX
Document type
User guide
Values of all available output parameters are locked (showing the latest valid value) when sensor purge, autocalibration, or condensation prevention functions are active.

Output parameter is available on this model.

Output parameter is unavailable during sensor warming unless temperature is written to register 0334hex from an external source

Output parameter is not available on this model.

Table 1. Availability of output parameters
Output parameter Output unit DMP5 DMP6 DMP7 DMP8
Relative humidity %RH
Temperature °C
Dew point temperature °C
Dew/frost point temperature °C
Dew/frost point temperature at 1 atm °C
Dew point temperature at 1 atm °C
Absolute humidity g/m3
Mixing ratio g/kg
Water concentration ppmv
Water vapor pressure hPa
Water vapor saturation pressure hPa
Enthalpy kJ/kg
Dew point temperature difference °C
Absolute humidity at NTP g/m3
Water mass fraction ppmw
Diagnostic parameters 1
Sensor saturation ratio (SSR) %
Sensor temperature (Ts) °C
1 Selectable as output parameters using the Indigo80 handheld indicator and the Modbus protocol.