Adjusting analog output level with Insight - HMT370EX
HMT370EX User Guide
- Document code
- Document type
- User guide
Detach the probe body and open the transmitter cover.
Connect a multimeter to the mA testing points located above the output screw terminals
on the transmitter component board (see Figure 1).
Connect to Insight (see Connecting to Insight PC software).
Select Analog output 1 adjustment or Analog output 2 adjustment.
and then either
Follow the instructions in the Insight interface to carry out the adjustment.
Remove the multimeter, close the transmitter cover, and reattach the probe body.