AQT530 is available in different models, and configurations can be selected based on the needs.
|Gases only||NO2, NO, O3, CO|
|Particles only||PM10, PM2.5, PM1|
|Gas and particles||NO2, PM10, PM2.5, PM1|
|Gases and particles||NO2, NO, O3, CO, PM10, PM2.5, PM1|
The default Modbus RTU settings are baud rate 19200, data bits 8, parity E (even), stop bits 1. You can configure the settings using a terminal program on a laptop and a maintenance cable.
An AQT530 product model for Vaisala Road Weather Station RWS200 is also available.
You can select a sensor cable and a mounting kit. The following cable options are available.
|M12/8(F) - open leads 3.5 m (11 ft 5 in)||220496|
|M12/8(F) - open leads 5 m (16 ft 4 in)||223283|
|M12/8(F) - open leads 10 m (32 ft 9 in)||220497|
|AQT530 mounting kit for pole mast 30 ... 120 mm (1.18 ... 4.72 in) and wall
Includes mounting brackets, steel bands (2 pcs), and accessories
AQT530 mounting kit for sensor support arm mounting
Includes mounting brackets, clamps, and accessories
Steel band (2 pcs) for pole mast 120 ... 400 mm (4.72 ... 15.75 in)
Order this in case the default steel band in the mounting kit is not long enough
|USB maintenance cable||253163SET|
A USB maintenance cable is recommended for each network.
For spare parts, see AQT530 Maintenance Guide (M212580EN).