AQT530 ordering options - AQT530

AQT530 Product Description

Document code
English (United States)
Document type
User guide

AQT530 is available in different models, and configurations can be selected based on the needs.

Table 1. AQT530 product models
Model Measurements
Gases only NO2, NO, O3, CO
Particles only PM10, PM2.5, PM1
Gas and particles NO2, PM10, PM2.5, PM1
Gases and particles NO2, NO, O3, CO, PM10, PM2.5, PM1

The default Modbus RTU settings are baud rate 19200, data bits 8, parity E (even), stop bits 1. You can configure the settings using a terminal program on a laptop and a maintenance cable.

An AQT530 product model for Vaisala Road Weather Station RWS200 is also available.

You can select a sensor cable and a mounting kit. The following cable options are available.

Table 2. AQT530 options and accessories
Option Order code
M12/8(F) - open leads 3.5 m (11 ft 5 in) 220496
M12/8(F) - open leads 5 m (16 ft 4 in) 223283
M12/8(F) - open leads 10 m (32 ft 9 in) 220497
AQT530 mounting kit for pole mast 30 ... 120 mm (1.18 ... 4.72 in), sensor support arm, and wall mounting

Includes mounting brackets, steel bands (2 pcs), and accessories


Steel band (2 pcs) for pole mast 120 ... 400 mm (4.72 ... 15.75 in)

Order this in case the default steel band in the mounting kit is not long enough

USB maintenance cable 253163SET

A USB maintenance cable is recommended for each network.

For spare parts, see Vaisala Air Quality Transmitter AQT530 Maintenance Guide.