Power supply terminals and lead-through − AC (mains) power option - INDIGO520 - INDIGO500SERIES - INDIGO510

Indigo510, Indigo520 Quick Guide

Document code
M212290EN
Revision
D
Language
English (United States)
Product
INDIGO520
INDIGO500SERIES
INDIGO510
Document type
User guide
WARNING Only licensed experts may install electrical components. They must adhere to local and state legislation and regulations.
WARNING Transmitters powered with AC (mains) power must be connected only to a grounded (earthed) power supply (class I equipment).
WARNING Only licensed experts may connect the AC (mains) power connection to the power supply. A readily accessible disconnect device must be incorporated in the fixed wiring.
WARNING Make sure that you prepare and connect only de-energized wires.
CAUTION Do not modify the unit or use it in ways not described in the documentation. Improper modification or use may lead to safety hazards, equipment damage, failure to perform according to specification, decreased equipment lifetime, or the warranty becoming void.
CAUTION Do not use the transmitter in a manner not specified by Vaisala. If the transmitter is used in an unspecified manner, the protection provided by the equipment may be impaired.
CAUTION Do not replace detachable mains supply cords by inadequately rated cords.

Power supply input wiring is required only for transmitters powered with protective extra-low voltage (PELV) or AC (mains) power.

For the M20×1.5 cable gland ordered together with the transmitter from Vaisala, the cable diameter is 5.0 … 8.0 mm (0.20 … 0.31 in). Tightening torque for the cable gland is 8 Nm.

Table 1. AC power supply input terminals
Terminal Function Notes
Power supply ground
L Line 100 … 240 V AC 50/60 Hz
N Neutral