Starting up transmitter using touchscreen display - INDIGO520 - INDIGO500SERIES - INDIGO510

Indigo510, Indigo520 Quick Guide

Document code
M212290EN
Revision
D
Language
English
Product
INDIGO520
INDIGO500SERIES
INDIGO510
Document type
User guide
  1. Remove the plastic protection cover on the touchscreen display.
  2. Power up the transmitter.

    Powering up takes some minutes.

    After the power-up, the Measurements view opens, showing the 2 preferred measurement parameters from each connected probe.

  3. Select the configuration menu symbol at the upper right corner of the touchscreen.
  4. The default language of the user interface is English. If you want to use another language, select it in Transmitter > Language.

Your transmitter is now ready for operation. You can next go through these additional settings:

  • Date and time
  • Network
  • Units

For information on configuring the home views and outputs on the touchscreen, see Indigo500 Series User Guide (M212287EN), available at www.vaisala.com.