Enabling Modbus TCP/IP in web interface - INDIGO500SERIES - INDIGO510 - INDIGO520

You need Administrator user rights for this task.

CAUTION Set Modbus TCP/IP write on only when you need to write on the Modbus registers. Remember to set Modbus TCP/IP write off, when you don't need to write anymore.

CAUTION Do not set Modbus TCP/IP write on in a open network.

1. Connect to the web interface.
2. Log in to the web interface as an administrator user.
3. Select Transmitter > Network.
4. Check that the network settings are set correctly.
5. Select Inputs and outputs > Digital interfaces.
6. To read the Modbus registers of the transmitter and devices connected to it, in Modbus TCP/IP read, set Modbus read on.
7. To enable writing on the Modbus registers of the transmitter and devices connected to it, in Modbus TCP/IP write, set Modbus write on.
8. Select Apply.