Testing relays in web interface - INDIGO500SERIES - INDIGO510 - INDIGO520

Indigo510, Indigo520 User Guide
Document code
M212287EN
Revision
P
Language
English
Product
INDIGO500SERIES
INDIGO510
INDIGO520
Document type
User guide
Figure 1. Relays test mode in web interface
  1. Connect to the web interface.
  2. Log in to the web interface as an administrator user.
  3. Select Inputs and outputs > Relays.
  4. In the Test mode tab, configure test mode settings.
    1. In Test mode, turn the test mode on for the relay you want to test.
    2. In Relay state, activate the relay.
  5. Select Apply.
  6. After verifying the output, go back to Inputs and outputs > Relays > Test mode and turn the test mode off.
  7. Repeat  4…6  for all the relays you want to test.