Standard wall mounting - INDIGO500SERIES - INDIGO510 - INDIGO520

Allen key (4 mm), provided Crosshead screwdriver Drill with Ø 8 mm drill bit Screws (2 pcs), provided Washers (2 pcs), provided Wall plugs (2 pcs), provided

1. Open the 2 hex screws on the cover of the transmitter using a 4-mm Allen key.
2. Open the transmitter cover.
3. Hold the transmitter level against the installation surface and use a pen to mark the places of the mounting holes. The mounting holes are 157 mm (6.18 in) apart.
4. Drill 55 mm (2.17 in) deep holes and insert wall plugs.
5. Mount the transmitter to a wall using 2 screws and a crosshead screwdriver. Place nylon washers under the screws to protect the surface of the transmitter.