Installation kit for pole or
pipeline (item code 215108):
Fixing brackets (2 pcs) for
100 mm poles
Mounting nuts for fixing
brackets, M8 (4 pcs)
Mounting plate (1 pcs)
Using fixing brackets and a mounting
plate, you can install the transmitter to a vertical or horizontal pole. Figure 1. Attaching mounting plate to fixing
brackets - vertical pole mounting
1
Mounting nuts for fixing brackets, M8 (4 pcs)
2
Note the position of the arrow when mounting. This side must be face up
when mounting.
Figure 2. Attaching transmitter to mounting
plate - vertical pole mounting
Place the fixing brackets around the pole and attach the mounting plate to the brackets
using 4 mounting nuts.
Make sure that the arrow
in the mounting plate points upwards.
Open the 2 hex screws on the cover of the transmitter using a 4-mm Allen key.
Open the transmitter cover.
Attach the transmitter to the mounting plate using 2 × 14-mm screws and a 5-mm Allen
key. Place nylon washers under the screws to protect the surface of the transmitter.
