You can update the transmitter software
through the web interface.
| You need Administrator user rights for this task. |
| Data logging feature has
changed. Installing software version 1.13 or later to replace software version 1.12 or earlier
removes all previously logged data. |
| A factory reset is needed after updating to an older software version. |
Before you start:
- Make sure that you have the software
update file locally on your computer. You can download the file from https://www.vaisala.com/en/lp/indigo500-software-download.
- If your transmitter does not have a network connection, make sure that both the
transmitter and the computer connected to it are set to use static network settings.
-
Connect to the web interface.
-
Log in to the web interface as an administrator user.
-
In , select Browse, and browse to the software update file.
-
Select Update.
Updating takes some minutes.
The transmitter restarts. After the restart,
you will be prompted to log in again. You can see the updated software version under
System status.
| If the transmitter's IP
address is assigned via DHCP, the transmitter may get a new IP address upon restarting. To
continue using the web interface, reconnect using the transmitter's new IP address. |
