Configuring analog input on touchscreen - INDIGO500SERIES - INDIGO510 - INDIGO520

Indigo510, Indigo520 User Guide

Document code
Document type
User guide
Analog input is not available in Indigo510 transmitters or transmitters that are powered with Power over Ethernet (PoE).
Only 1 measurement probe can be connected to the transmitter when you power the analog input device through Indigo520 probe 2 connection terminal. The measurement probe has to be connected to probe 1 connection terminal.

The Indigo520 transmitter has 1 analog current (mA) input.

Before you start, make sure that the probes you want to use are connected to the transmitter.

Figure 1. Analog input configuration menu on touchscreen
  1. Select the configuration menu symbol at the upper right corner of the touchscreen.
  2. Select Inputs and outputs > Analog input.
  3. In Analog input off/on, set analog input on.
  4. To power your analog input device through Indigo520, in Analog input powering, set analog input powering on.
To see the changes you made, select . Then use the left and right arrows at the bottom of the touchscreen to navigate to the I/O status view.