Enabling Modbus TCP/IP on touchscreen - INDIGO500SERIES - INDIGO510 - INDIGO520

Indigo510, Indigo520 User Guide
Document code
M212287EN
Revision
P
Language
English
Product
INDIGO500SERIES
INDIGO510
INDIGO520
Document type
User guide
CAUTION Set Modbus TCP/IP write on only when you need to write on the Modbus registers. Remember to set Modbus TCP/IP write off, when you don't need to write anymore.
CAUTION Do not set Modbus TCP/IP write on in a open network.
  1. Select Menu > Transmitter > Network.
  2. Make sure that Network off/on is set on, and that the network settings are set correctly.
  3. Select Menu > Inputs and outputs > Digital interfaces.
  4. To read the Modbus registers of the transmitter and devices connected to it, in Modbus TCP/IP read, set Modbus read on.
  5. To enable writing on the Modbus registers of the transmitter and devices connected to it, in Modbus TCP/IP write, set Modbus write on.