Configuring relays in web interface - INDIGO520 - INDIGO500SERIES - INDIGO510

Indigo510, Indigo520 User Guide

Document code
M212287EN
Revision
M
Language
English (United States)
Product
INDIGO520
INDIGO500SERIES
INDIGO510
Document type
User guide
You need Administrator user rights for this task.
Figure 1. Relays configuration menu in web interface
  1. Connect to the web interface.
  2. Log in to the web interface as an administrator user.
  3. Select Outputs > Relays.
  4. Select the relay you want to configure: Relay 1 or Relay 2.
  5. Configure the relay settings:
    1. In Relay off/on, set the relay off to edit settings.
    2. In Source, select the source for the measurement parameter that controls the relay.
    3. In Parameter, select the measurement parameter that controls the relay.
    4. In Activation, select whether the relay activates above or below the activation/deactivation limit.
    5. In Limit, define the limit which the measured parameter value must reach for the relay to activate/deactivate.
    6. In Hysteresis, define a buffer value for relay deactivation. With hysteresis, an activated relay switches off only when the measured value crosses the relay activation/deactivation limit and the additional buffer value.
    7. Set the relay on.
    8. Select Apply.
  6. Repeat 45 for all the relays you want to use.