Standard wall mounting - INDIGO520 - INDIGO500SERIES - INDIGO510

Indigo510, Indigo520 User Guide

Document code
M212287EN
Revision
M
Language
English (United States)
Product
INDIGO520
INDIGO500SERIES
INDIGO510
Document type
User guide
  • Allen key (4 mm), provided
  • Crosshead screwdriver
  • Drill with Ø 8 mm drill bit
  • Screws (2 pcs), provided
  • Washers (2 pcs), provided
  • Wall plugs (2 pcs), provided
Figure 1. Standard wall mounting
Figure 2. Transmitter mounting dimensions
  1. Open the 2 hex screws on the cover of the transmitter using a 4-mm Allen key.
  2. Open the transmitter cover.
  3. Hold the transmitter level against the installation surface and use a pen to mark the places of the mounting holes. The mounting holes are 157 mm (6.18 in) apart.
  4. Drill 55 mm (2.17 in) deep holes and insert wall plugs.
  5. Mount the transmitter to a wall using 2 screws and a crosshead screwdriver. Place nylon washers under the screws to protect the surface of the transmitter.