|
| Note that configuring these settings requires using Insight in Advanced Mode. |
You can test the voltage (V) output level of the transmitter with a multimeter, and adjust the output level (2-point adjustment) if necessary.
| CAUTION Always switch Test mode off after testing to return the analog outputs to normal operating mode. The transmitter does not output measurement data when the analog outputs are in test mode. |
- Switch to Advanced Mode in the Settings menu.
- Select to switch the probe to calibration mode.
- Select the analog output you want to test (Analog Output 1[2]).
- Follow the instructions in the Insight interface to carry out required output tests and adjustments.