Configuring Minimum and Maximum RH and T Errors with Insight - HMD60 - HMD65 - SWINSIGHT10

HMD65 User Guide

Document code
M212243EN
Revision
C
Language
English
Product
HMD60
HMD65
Document type
User guide

You can define the minimum and maximum limit that the RH or T measurement output can reach before the output moves to error state.

Note that configuring these settings requires using Insight in Advanced Mode.
Figure 1. Minimum/Maximum Allowed Measurement Value Before Error
To define the minimum/maximum error limits:
  1. Switch to Advanced Mode in the Settings menu.
  2. Select > Configure Device > Advanced.
  3. Enter the values for minimum and maximum RH and T as applicable, select Save and exit the menu with Close.