Replacing side receiver hood - FD70

FD70 Configuration and Maintenance Guide
Document code
M212222EN
Revision
J
Language
English
Product
FD70
Document type
User guide
  • 3-mm Allen key

Make sure that you have the replacement spare part available.

  1. Switch off both AC (mains) power switch and battery switch.

    Make sure that there is no AC (mains) power available for the system.

    1
    Battery switch
    2
    AC (mains) power switch
  2. Remove the protection cap from the side receiver.
  3. Remove the hood by opening the 3 screws that hold it in place and opening the connector that connects the hood to the side receiver.
    CAUTION Be careful when removing the hood to avoid damaging the connectors.
    1
    Side receiver hood
    2
    Spring washer B4 DIN127 (3 pcs)
    3
    Screw M4×16 DIN912 (3 pcs)
    4
    Connector (receiver)
    5
    Connector (hood)
    6
    Gasket
  4. Attach the connector between the replacement hood and the receiver module.

    Make sure that the parts of the connector snap in place and you hear a click.

  5. Attach the hood with 3 screws.
    The transmitter and receiver hoods are not identical. The transmitter window is transparent and the receiver windows are black. Check carefully before replacing the hood.
    CAUTION Make sure that the gasket is in the right place. Make sure that no cables are in the optical path inside the receiver.
  6. Reattach the protection cap.
  7. Power up the system.
  8. Perform calibration adjustment (mode adjust) with the field calibrator kit (FDA701).