Installing PJB480 on Mast - PJB480

PJB480 Installation and Maintenance Guide
Document code
M212200EN
Revision
B
Language
English
Product
PJB480
Document type
User guide
  • 5‑mm Allen key

Use 2 sets of the optional APPK-SET mounting kit for the pole mast:

  • APPK-SET60: Ø 60 mm (2.36 in) pole mast
  • APPK-SET75: Ø 75 mm (2.95 in) pole mast
  • APPK-SET100: Ø 100 mm (3.94 in) pole mast
  • APPK-SET106: Ø 106 mm (4.17 in) pole mast
Figure 1. Parts of APPK-SET Mounting Kit
1
Hex screw M6×30 DIN912 A4 (4 pcs)
2
Spring lock washer A6 DIN127 A4 (4 pcs)
3
Flat washer A6 DIN125 A4 (4 pcs)
4
Round sleeve spacer M6, D10/6.4 L10, AISI 304 (4 pcs) (only included in APPK-SET106)
5
Top clamp plate

Select a location where the enclosure door can be opened easily and the disconnection device is reachable.

  1. Measure and mark the place where the clamp is to be installed.
  2. Attach the lower clamp to the pole mast.
  3. Attach the upper clamp to enclosure.
  4. Mount the enclosure to the mast and secure clamp screws firmly.