In addition to items in the delivery, you need the following:
AC (mains) cable with a minimum cross-section of 3 × 1.5 mm2 (15 AWG)
An external disconnection device (for example, a circuit breaker) for the AC (mains)
power connection
APPK-SET mounting kit for mast installation (optional)
Signal cable with a minimum of 3 wires and a cross‑section of
0.25 mm2 ... 1.5 mm2 / AWG 24 ... AWG 16 (for connecting PJB to
weather station, optional)
Since the cables used may vary, PJB480
includes cable glands for fitting different sizes of cables.
Select the cable gland based on the size of
the cable you are using.
Figure 2. PJB480 Enclosure Parts
Number in Figure
Part
Purpose
1
Cable gland M16×1.5 (2 pcs)
For cable diameter range
5 ... 10 mm (0.20 ... 0.39 in).
AC (mains) cable typically fits
this cable gland.
2
Cable gland M32×1.5 (2 pcs)
For cable diameter 18 ... 25 mm (0.71 ... 0.98 in).
3
Cable gland M20×1.5 (1 pc)
For cable diameter range
6 ... 12 mm (0.24 ... 0.47 in).
Wind sensor cables CBL210706-2M
and CBL210706-10M fit this cable gland.
4
Cable gland M25×1.5 (3 pcs)
For cable diameter range
9 ... 16 mm (0.35 ... 0.63 in).
5
Reservation for a cable gland (1 pc)
For adding an optional 40 mm (1.57 in) cable gland.
