Changing temperature unit - AQT400

AQT400 Series Configuration Guide

Document code
M212059EN
Revision
C
Language
English (United States)
Product
AQT400
Document type
User guide
  1. Establish a connection to AQT400. See Connecting to AQT400 with RS-232 (CLI).
  2. To change temperature unit to Celsius, type the following:
    set tempunit=0
    write --really

    To change to Fahrenheit, type:

    set tempunit=1
    write --really
  3. To reboot the device and check that the settings is correct, type the following:
    reboot --really
    show tempunit
  4. When done, close the connection.