Attaching HPP270 probes to Indigo300 transmitter - HPP272 - INDIGO201 - INDIGO202

HPP272 User Guide
Document code
M211972EN
Revision
G
Language
English
Product
HPP272
Document type
User guide
An accessory cable is required to connect the probe to the transmitter. See spare part and accessory information for available cable options.
Figure 1. Attaching HPP272 to Indigo300
1
Probes and probe cables are locked in place with the locking wheel. Never turn from the probe body or the cable connector.
2

To connect probe cables, insert the cable into the transmitter connector and hold in place while turning the locking wheel.

  1. Connect the probe connection cable to the probe.
  2. Insert the other end of the cable into Indigo's cable connector, and then lock the connector in place by turning the locking wheel counterclockwise. Do not turn the cable connector when attaching the cable, only the locking wheel on the transmitter.
  3. When Indigo recognizes the connected probe, it shows a notification message on the display.