Selecting Relay Error State - INDIGO200SERIES - INDIGO202

You can define whether the relay is switched off or on in an error state, or whether the relay remains in the state it is on the moment an error state occurs.

1. Open the Settings > Relays menu in the wireless configuration interface.
2. In the Relays menu, select the relay error state from the Error State dropdown menu:
   1. To set the relay to release when an error occurs, select Inactive.
   2. To set the relay to activate when an error occurs, select Active.
   3. To keep the relay in the same state as it was when the error occurred, select No change.