You can clean the Indigo transmitter body by wiping it with a moist cloth. Standard
cleaning agents can be used.
| Refer to the probe-specific cleaning instructions when cleaning the probe connected to
Indigo. Do not spray anything directly on the probe connected to Indigo, since that may
deposit impurities on the sensor. |
Chemical tolerance
The following chemicals can be used to clean Indigo:
- H2O2 (6000 ppm), non-condensing
- Alcohol-based cleaning agents such as ethanol and IPA (70 % Isopropyl Alcohol, 30 %
water)
- CaOCI (hypochlorite) max. 0.5 %
- QAC (quaternary ammonium cations) max. 0.5 %)
| Avoid exposing the transmitter to chemicals for unnecessarily long periods of time.
Do not immerse it in a chemical, and wipe chemicals off the surfaces after
cleaning. |