Connecting guy wires to mast - DKE100

DKE110W and DKE110AV User Guide

Document code
M211943EN
Revision
D
Language
English (United States)
Product
DKE100
Document type
User guide
WARNING Follow local and state legislation and regulations on occupational safety.
Wear protective eyewear, gloves, and a safety helmet.
To protect your hands, always wear gloves when handling the guy wires.
WARNING Make sure your clothing and equipment do not get tangled in the wires or equipment during installation.

In connecting the guy wires to the mast, you need:

  • Guy wire 11.5 m (37 ft) (2 pcs)
  • Guy wire 9.15 m (30 ft) (1 pc)
  • If you use additional middle guy wires, guy wire 8.2 m (26 ft 10 in) (3 pcs)
  • Shackle M10 A4 (3 pcs) (if you use additional middle guy wires, 6 pcs)
  1. Attach the guy wires to the flange with shackles.
    1
    Guy wire flange
    2
    Shackle M10 A4 (3 pcs)
  2. Check which guy wire is 9.15 meters (30 feet) long. Turn the flange so that this guy wire is oriented towards guy wire 1 foundation.
    1
    Guy wire 1 foundation
    2
    Mast foundation
  3. If you have the additional middle guy wire set, use shackles to install the guy wires to the flange that is in the middle of the mast.