Installing winch to erected mast - DKE100

DKE110W and DKE110AV User Guide

Document code
M211943EN
Revision
D
Language
English (United States)
Product
DKE100
Document type
User guide
  • 10‑mm wrench
  • 24‑mm wrench (2 pcs)
WARNING Before disconnecting the guy wire, check that the winch is installed securely and that the winch wire is tight.
  1. Assemble the lifting rod by screwing the single parts to the joined parts.
  2. Attach the lifting rod to the mast base plate.
    1
    Hex screw (2 pcs)
    2
    Hex nut (2 pcs)
  3. Disconnect the lower part of the guy wire that is closest to the lifting rod.
  4. Lift up the lifting rod and attach it to the guy wire with a shackle.
    1
    Guy wire
    2
    Shackle
    3
    Lifting rod
  5. Attach the winch hook to the end of the lifting rod.
    1
    Guy wire
    2
    Lifting rod
    3
    Winch hook
  6. Disconnect the guy rod from the guy wire.
  7. Remove the locking pin from the winch and install the winch to the lifting eye bolt on the guy wire foundation.
    1
    Winch
    2
    Locking pin
  8. Secure the winch with the locking pin.