Mounting AQT400 - AQT400

AQT400 Series User Guide

Document code
M211942EN
Revision
E
Language
English
Product
AQT400
Document type
User guide
  • Crosshead screwdriver
Figure 1. AQT400 mounting bracket installation accessories
1
Flat washer A4,3 DIN125 A4 (3 pcs)
2
Crosshead screw M4×8 DIN7985 PZ A4 (3 pcs)
  1. Insert 2 screws and washers in the holes on the opposite sides of the bottom plate.

    Leave the screws about 5 mm (0.20 in) from the surface of the unit.

  2. Push the screws to the slots in the mounting bracket.

    Make sure that the hole in the mounting bracket aligns with the hole in the bottom plate.

  3. Insert the third screw and washer in the hole in the mounting bracket and attach it to unit. Tighten the screw.
  4. Tighten the other 2 screws and make sure that unit is firmly attached to the mounting bracket.