- Establish a connection to AQT400.
-
AQ Tool displays the retrieved measurements in Measurements.
- The measurements that have not stabilized are displayed in red. During the stabilization period (24 hours), the window displays a red text Device is warming up.
- Once the stabilization period is over and the measurements are reliable, the window displays a green text Device is ready for measurements.
- You can change the measurement units of the displayed data. In Measurement units, select ppm or µg/m3, and °C or °F.
-
To view the data in graphical format, select Show graph, and in the Measurements window, set the following:
- Device
- The list shows the devices that have been connected to your computer and for which there is measurement data. Select the device.
- Measurements
- Select the measurements to plot on the graph. The graph is adjusted accordingly as soon as you make the selection. To clear all selections, use Clear.
- Date range
- Define the interval from which you want to view the measurements. Select Always show latest to include the most recent measurements.
- Graph
- Select Manual range, if you want to adjust the X and Y axis of the graph. Otherwise, the values start from 0.
AQ Tool shows the measurements of one device at a time. To view the measurements of another device, select another device.