Connecting Probe to MI70 Indicator - MI70 - GMP252
GMP252 User Guide
- Document code
- English (United States)
- Document type
- User guide
If the probe is installed permanently into a device (for example, an incubator or a
chamber), disconnect the probe from the connector.
If the MI70 indicator is on, turn it off.
Connect the probe to the MI70 indicator using the MI70 connection cable (Vaisala order code:
Turn on the MI70 indicator (time and date are requested at first startup). MI70 detects
the probe and proceeds to show the measurement screen. The parameters measured by probe
will start to show valid measurement results after a few seconds.