Attaching Probes and Cables - GMP252 - INDIGO201 - INDIGO202

GMP252 User Guide

Document code
M211897EN
Revision
D
Language
English (United States)
Product
GMP252
Document type
User guide
Figure 1. Attaching Probes and Cables to Indigo
1
Insert probes into the probe connector with the orientation mark facing out.
2
Probes are locked in place with the locking wheel. Never turn from the probe body.
3
Connect probe cables in the same way as probes: insert the cable in the connector and hold in place while turning the locking wheel.
  1. Insert the probe into the probe connector with the orientation mark on the probe body facing out.
  2. Hold the probe in the probe connector and lock it in place by turning the locking wheel counterclockwise. Never turn the probe body when attaching or removing probes, only the locking wheel of the Indigo transmitter.
  3. When the transmitter recognizes the connected probe, it shows a notification message on the display (for example, Probe Connected: GMP251). In the non-display model, a green LED is lit when Indigo recognizes the probe.