|
Up to two Vaisala Indigo-compatible probes or transmitters can be connected to the ports located on the bottom of Indigo80. You can connect and disconnect devices both when the indicator is powered on and when it is off.
Vaisala recommends using probe connection cables provided by Vaisala when connecting devices to the indicator. Cables and other accessories are available to order at store.vaisala.com.
- 1
- M12-5F ports on the bottom of Indigo80 for connecting compatible
Vaisala devices. Ports are labeled
and 
. - 2
- M12-5M A-coded cable connector
- 3
- M12-5F A-coded cable connector
- 4
- HPP271 probe, displayed as
by Indigo80
- 5
- HPP272 probe, displayed as
by Indigo80
-
Insert the probe connection cable in one of the ports on the bottom of the
indicator.
- Note the orientation of the cable connector when inserting it
- Hold the connector in place while turning its locking ring clockwise – never twist the connector body!
-
Connect the probe to the M12-5F end of the probe connection
cable.
When the indicator recognizes the connected probe, it shows a notification on the display (for example, GMP252 connected). A probe connected to the leftmost port in the indicator is labeled
on the indicator's
display, while the probe in the rightmost port is labeled .