Mounting RSI51 on wall - RSI51

RSI51 Installation Manual

Document code
M211863EN
Revision
B
Language
English (United States)
Product
RSI51
Document type
User guide
  • Screwdriver
  • Screws for attaching the mounting frame to the wall (4 pcs)
RSI51 is pre-attached to the mounting frame. The mounting screws are not included.
  1. Insert 2  screws 185 mm (7.28 in) apart into a wall. Leave the heads of the screws about 5 mm (0.20 in) from the wall.
    1
    Keyhole slot
    2
    Screw hole
    3
    Mounting frame
  2. Push the keyhole slots in the top of the mounting frame over the screws, and slide down.
    1
    Screw (2 pcs)
  3. Tighten the screws.
  4. Insert 2 screws into the screw holes in the bottom of the mounting frame. Tighten the screws.
    1
    Screw (2 pcs)