Configure the network settings of the
external Ethernet connection (ETH0).
Connect to the user interface as the Admin user.
In the user interface, select Settings > Network > IP
address.
Select if the external Ethernet connection should be Enabled or Disabled.
If you enabled the external Ethernet connection, select how its IP address is assigned:
DHCP for automatic assignment, or Static IP
address to enter the values manually.
If you selected Static IP
address, enter the following values:
IP
address
Subnet mask
Default gateway
IP addresses in 192.168.28.0/24 cannot be used for the external network connection
(ETH0) since they are reserved for the service port (ETH1).