Connecting to user interface - OPT100

OPT100 Installation Guide

Document code
Document type
User guide
  • Laptop computer with:
    • RJ45 Ethernet connector
    • Web browser (Google Chrome, Microsoft Edge, or Mozilla Firefox)
  • Ethernet cable with RJ45 connectors for temporary use
  • Administration password for this DGA Monitor
  1. Connect your computer to the same network as the DGA monitor. If you are connecting locally, connect the network cable between your computer and the port marked ETH1 on the processing unit inside the DGA monitor.
  2. Open a web browser, and enter the IP address of the DGA monitor in the address bar:
    • If you connect locally through the ETH1 port, use the following IP address:
    • If you connect through the network meant for SCADA integration, use the IP address that has been assigned to the DGA monitor.
  3. You will get a warning that your connection is not secure. This is expected and happens when connecting with a new device. The user interface of the DGA monitor is secured with a self-signed certificate by default. Continue despite the warning. HTTPS traffic is always encrypted even if the certificate is not trusted.
  4. Select Admin as the user name.
  5. Enter the unique administration password for this DGA monitor. The password is included in the delivery documentation.
  6. Select Log in.