If the surface of the mounting point is painted or has some other finishing that prevents a good electrical connection, consider using the bushing and grounding kit (222109) and a cable to ensure ground connection.
Use the bushing and grounding kit to run a cable from the fixing screw to a grounding point. The kit does not include a grounding cable. The minimum grounding conductor size is 4 mm2 (11 AWG).
-
Assemble the grounding kit so that the connector for the grounding cable is between the
washers and nuts.
- 1
- Connector for grounding cable
- 2
- Abiko connector
- 3
- Washer (2 pcs)
- 4
- Nut (2 pcs)
- 5
- Fixing screw
-
Insert the grounding kit through the hole in the seal. Make sure that the nuts are
tight so that the connector has a good connection.
- 1
- Seal
- 2
- Fixing screw
-
Connect the other end of the cable to a good grounding point.