Changing from CLI mode to Modbus mode - WXT530

WXT530 Series User Guide
Product status
Document code
M211840EN
Revision
G
ft:locale
en-US
Product
WXT530
Document type
User guide
Before changing to the Modbus mode, save the settings with Vaisala Configuration Tool.
You can use Vaisala Configuration Tool (version 2.62 or newer) to change between the Modbus and ASCII protocol. Alternatively use a terminal software as follows.
  1. Set the computer terminal software, such as Tera Term, communication parameters to 19200 8N1.
  2. Connect WXT530 service cable to the USB port of your computer and to WXT530 service connector.
  3. In the terminal software, type the command ?XU,M=M!.

WXT530 starts up in the Modbus mode. Communication with the terminal software is no longer possible.